One of the first questions which is almost always asked when installing uPVC windows is, “How much is this going to cost me? It is not a fraud or an unpredictable supplier that causes price fluctuations but several legitimate reasons that are responsible for the price to increase or decrease. Here’s a breakdown of the price of uPVC windows in Pakistan in 2026, so you can avoid getting caught by surprise when requesting a quote.
Contact with Al Munir Windows and get Best Quality windows in best prices in all over Pakistan.
What Determines uPVC Windows Price in Pakistan?
The cost of uPVC windows varies. The number that gets moved is:
1. Window Size
The more profile material and glass needed, the more expensive the windows are. It is usually quoted on a per square foot basis, so the larger the opening, the greater the total cost at the same rate.
2. Profile Brand & Grade
UPCVs are not all created equal. High quality UV stabilized profiles by reputable manufacturers are initially more expensive but will last longer and have superior performance characteristics in extreme heat which is particularly important in Pakistan due to its climate.
3. Glazing Type
- Single glazing – Higher cost, standard insulation
- Double glazing –Thermal and sound insulation much improved but expensive
Double glazing usually costs a bit more per square foot but is more than compensated for by the long-term energy savings.
4. Window Style
- Fixed windows – These are normally the least expensive (no moving components).
- Sliding windows – Mid-range pricing
- Casement windows – Moderate to high cost, have hinges and locks.
- Tilt & turn windows – These are usually the most costly windows with complicated window mechanisms.
5. Hardware Quality
Locks, hinges and handles come in standard and high quality (typically imported) options. More expensive hardware will result in better security and durability at a higher cost.
6. Number of Windows & Project Size
Generally, larger projects (several windows or an entire house) have more favorable pricing by the unit than single window orders because the supplier can provide a discount for the volume.
7. Installation Complexity
Labor costs are usually added to the job for custom shapes, higher floors or a change of frame (rather than new construction).
Typical Price Ranges in Pakistan (2026)
It’s not possible to give a definite price as it varies with the factors mentioned above but as a guide:
| Window Type | Relative Cost |
|---|---|
| Fixed uPVC Window | Lowest |
| Sliding uPVC Window | Low–Mid |
| Casement uPVC Window | Mid |
| Tilt & Turn uPVC Window | Highest |
It is best to share window size, quantity and style with a supplier on a project-specific basis to ensure an accurate quote for your project; national averages do not always reflect the true cost of your project.
uPVC Windows Price in Pakistan – 2026 Rates
Based on current market rates across major cities, here’s what you can generally expect per square foot:
| Window Type | Price Range (PKR/sq. ft.) |
|---|---|
| Fixed uPVC Window | 800 – 1,600 |
| Sliding uPVC Window | 1,800 – 3,400 |
| Casement (Openable) Window | 2,900 – 4,500 |
| Tilt & Turn Window | 4,800 – 6,800 |
Additional cost factors:
- Double glazing upgrade: This increases the cost of the building by about PKR800-1200 per sq.ft., but reduces total cooling expenses by up to 30-35% during hot summers in Pakistan.
- Installation: PKR 500-1000 per sq. ft, depending on the complexity of the project & site access.
- Imported vs. local profiles: Imported brands cost PKR 2000-3000 per sq.ft. and have more chambers, UV stability, etc. and have a longer lifespan.
Rough per-window estimates:
- Small windows (e.g., bathroom): PKR 8,000 – 15,000
- Medium windows (e.g., bedroom): PKR 15,000 – 30,000
- Large windows (e.g., living room): PKR 50,000 – 100,000+
Is the Higher Upfront Cost Worth It?
Although the initial cost of uPVC windows is higher than end-of-the-market aluminium windows, this gap tends to close and sometimes narrow over the years with the following advantages:
- Lower energy bills from better insulation
- Little to no maintenance spending (no repainting or repairs)
- A longer lifespan before replacement is needed (typically 25–30 years)
Frequently Asked Questions
1. What is the average price range for uPVC windows in Pakistan?
The price range is quite wide depending on the size, profile grade, glazing choice and window style, and so it’s best to obtain quotes based on your individual project, rather than on an average price.
2. Why do uPVC window prices vary so much between suppliers?
It is not merely markup but principally a difference in profile brand/quality, glazing type, hardware and/or the inclusion of the installation.
3. Is double glazing worth the extra cost?
Yes, the extra insulation and noise reduction usually pay for the extra expense to the homeowner over time with energy savings.
4. Are tilt & turn windows really more expensive than casement windows?
Yes, generally. The material and installation cost of the tilt & turn windows are more complex because of the mechanisms in its hardware.
5. Does installation cost get included in the window price?
Depending on the supplier, this can be included in the quote just make sure to check and ask if the quote is a line item or if it’s included in the quote.
